Compare
$36.43
/
EA
Squids 3196 Grinder Tool Tethering Kit - 8lbs / 3. 6kg - Stainless Steel, Polyester, Elastic, Anodized Aluminum Alloy - 1 Each
The Squids® 3196 Grinder Tool Tethering Kit includes a 3110F(x) Dual Carabiner Tool Lanyard and a 3797 Power Tool Bracket - Grinder Tool Trap™. This tool tethering kit allows you to tether one standard corded or cordless grinder power tool weighing up to 8lbs / 3. 6kg making it easy to use your tools on the job while preventing dropped objects when working at-heights. STRAIGHT FORWARD INSTALLATION Connection points for tool lanyards are not always readily available on power tools, which can create hazardous environments while working at heights. This one-time assembly creates a quick and easy attachment to tether tools without complicated taping or shrinking. Simply fasten the included tool bracket and labels onto screw ports intended for removable grinder handles. Once the appropriate torque is applied to the anchor point, connect the included 3110F(x) Tool Lanyard to the bracket tether point. The stainless-steel tool bracket comes complete with a set of two metric fasteners (M8, M10) to mount to a variety of brands. PERFECT FOR SMALL HAND TOOLS The Power Tool Bracket for Grinders is the perfect solution for any grinder up to 8lbs / 3. 6kg in weight. The Bracket has a patented design that forces the tether directionally away from the grinders wheel. Though intended for corded or cordless angle grinders these brackets can also fasten to cameras, laser alignment tools and other tools and devices that contain screw ports which fit M8 and M10 fasteners.
3196 Kit Grinder Tool Tetherin gKit
Squids 3196 Grinder Tool Tethering Kit - 8lbs / 3.6kg - Stainless Steel, Polyester, Elastic, Anodized Aluminum Alloy - 1 Each
Squids 3196 Grinder Tool Tethering Kit - 8lbs / 3.6kg
Stainless Steel, Polyester, Elastic, Anodized Aluminum Alloy - 1 Each
Approved to the ANSI/ISEA 121-2018 standard
Kit includes:
One 3797 Power Tool Bracket - Grinder Tool Trap™
One 3110F(x) Dual Carabiner Tool Lanyard
Tether one standard corded or cordless grinder power tool
Quantity:
Compare
$104.68
/
KT
119-Piece Tool Set
Tool set includes 30 sockets (SAE and metric), 3/8 in. drive ratchet, spark plug socket, 3 in. extension bars, wrenches, pliers, 39 bits with holder, 24 hex keys, hammer, torpedo level, tape measure and four screwdrivers. Tool Kits Type: Combination Set; Number of Pieces: 119.
Tool set contains 30 sockets (SAE and metric), 3/8" drive ratchet, spark plug socket, 3" extension bars, 39 bits with holder and 24 hex keys.
Also includes wrenches, pliers, hammer, torpedo level, tape measure and four screwdrivers.
Quantity:
Compare
$36.93
/
EA
Squids 3191 Power Tool Tethering Kit - 10lbs / 4. 5kg - Anodized Aluminum Alloy - 1 Each
The Squids® 3191 Power Tool Tethering Kit allows you to tether one standard 10lbs / 4. 5kg power tool, making it easy to use your power tools on the job while preventing dropped objects when working at heights. WHATS INCLUDED Includes a Squids® 3100F(x) Single Carabiner Tool Lanyard and a Squids® 3780L Power Tool Trap. RECOMMENDED TOOLS The kit contains product solutions for tethering cordless power drills and cordless impact drivers. STRAIGHTFORWARD INSTALLATION Connection points for tool lanyards are not always readily available on tools, which can create a hazardous environment while working at heights. Learn how to tether your tools using the products included in the kit here. Simply open up the hook and loop straps of the power tool trap and place the battery end of the power tool into the power tool trap, with the back of the battery near the D-ring of the trap. Tighten the hook-and-loop straps on the power tool trap to secure the power tool inside. Attach the 3100F(x) Tool Lanyard to complete your tethering system. See full instructions for more details.
3191 Kit Power Tool Tethering Kit
Squids 3191 Power Tool Tethering Kit - 10lbs / 4.5kg - Anodized Aluminum Alloy - 1 Each
Squids 3191 Power Tool Tethering Kit - 10lbs / 4.5kg
Anodized Aluminum Alloy - 1 Each
TESTED & APPROVED - Approved to the ANSI/ISEA 121-2018 standard
MAX TETHERING CAPACITY - Tether one standard 10lbs / 4.5kg cordless power tool
KIT INCLUDES (click on each to learn more):
Squids® 3780 Power Tool Trap™
STANDARD FIT - Fits cordless power tool batteries up to: 5in L x 3.5in W x 3.5in H / 12.5cm x 9cm x 9cm
Quantity:
Compare
$30.71
/
EA
Squids 3194 Hand Tool Tethering Kit - 1lb / 0. 5kg - Plastic, Aluminum - 1 Each
The Squids® 3194 Hand Tool Tethering Kit includes a 3156 Coil Tool Lanyard with Single Carabiner and the 3740 Hand Tool Attachment Trap - Slips™ Variety 4-Pack. This tool tethering kit allows you to tether four different sized screwdrivers and hex key wrenches making it easy to use your tools on the job while preventing dropped objects when working at-heights. The 3156 Coil Tool Lanyard is more than just a small tool and hard hat lanyard. Built and tested to endure tough conditions and rated to support weight up to 2lbs / 0. 9kg, the coiled lanyard is made with a low-profile design and durable plastic. With the lightweight aluminum carabiner on one end and a tethering loop on the other, it easily connects to tool anchors and attachments, even while wearing gloves. The coiled tether design reduces lanyard length to prevent snag and tangle hazards. The coil stretches from a compact 12in to 48in / 30cm to 122 cm. STRAIGHTFORWARD INSTALLATION No additional install tools or complicated taping or shrinking! The patented Slips™ design requires a simple installation that follows its name. Simply "slip" the tool attachment on to the tool and connect the Squids® 3156 Coil Tool Lanyard to complete your tethering system. Unlike competitors that offer a fitted cap that can cover up information (like on the end of a screwdriver, for example) these solutions leave the end open. The single piece design is easier to install compared to competitors that require two to three pieces to be assembled onto the tool. Simply poke the end of the hand tool through the orange interior membrane of the Tool Slip and slide the attachment to the desired location. The star points of the attachments interior will hold its location and the swiveling exterior ring will provide a connection point for tool lanyards. To remove the Slips™, simply push on the tab to loosen and then slide it off the shaft of the tool. N
3194 Kit Hand Tool Tethering Kit
Squids 3194 Hand Tool Tethering Kit - 1lb / 0.5kg - Plastic, Aluminum - 1 Each
Squids 3194 Hand Tool Tethering Kit - 1lb / 0.5kg
Plastic, Aluminum - 1 Each
Approved to the ANSI/ISEA 121-2018 standard
Kit includes:
One Variety 4-Pack 3740 Hand Tool Attachment Trap - Slips™
One 3156 Coil Low Profile Tool Lanyard with Single Carabiner
Tether four different sized screwdrivers and hex key wrenches ranging from 0.05in - 0.5in // 1.3mm - 12.5mm diameter
Quantity:
Compare
$35.69
/
EA
Manhattan 17 Computer Tool Kit - Ideal for all types of routine computer maintenance, upgrades and general repair
MANHATTAN Tools & Tool Kits, not Network Ideal for all types of routine computer maintenance, upgrades and general repair Technician Tool Kit Computer Tool Kit, 17 pieces Ideal for all types of routine computer maintenance, upgrades and general repair Heavy-duty, zippered carrying case Lifetime Warranty Soldering iron, solder wick and solder Anti-static chip inserter, anti-static chip extractor, anti-static three-prong parts and chip retriever/extractor, anti-static chip tweezers Needle nose pliers Extra parts tube 1/4in nut-driver 3/16in nut-driver T10 & T15 torque screwdriver (2) Phillips head screwdrivers, small and standard (2) Slotted/Flat head screwdrivers, small and standard Black 0. 825 1. 82
Quantity:
Compare
$24.79
/
EA
Quantity:
Compare
$49.99
/
EA
Quantity:
Compare
$68.99
/
EA
Tripp Lite 4-Piece Network Installer Tool Kit with Carrying Case - RJ11 RJ12 RJ45
The all-in-one T016-004-K Network Installer Tool Kit contains essential tools for cable installers or anyone working in telecom or LAN environments: cable tester, crimping tool, LSA punchdown tool and stripper tool. The cable tester allows you to test wiring continuity for Cat5, Cat6, Cat6a and telephone cable assemblies at the flip of a switch. A combination of main tester unit and removable remote tester unit, the cable tester identifies a connection, no connection, short circuit or open circuit. The tester features modes for fast and slow flashing of LEDs during automatic testing. When not in use, the four-piece T016-004-K can be stored in its handy carrying case. Features Essential Tools for Cable Installers or Telecom/LAN Personnel Tests Cat5, Cat6, Cat6a and telephone cable assemblies. Cable tester combines main tester unit and removable remote tester unit. Identifies connection, no connection, short circuit or open circuit. Tests multiple types: RJ11, RJ12, RJ45. Fast and slow LED flashing modes during automatic testing. Designed to Make Your Work Easier Includes cable tester, crimping tool, LSA punchdown tool and stripper tool. Stores away in convenient carrying case. Tests multiple types: RJ11, RJ12, RJ45 Fast and slow LED flashing modes during automatic testing Includes cable tester, crimper, LSA punchdown tool and stripper Combines main tester unit and removable remote tester unit Includes convenient carrying case
Quantity:
Compare
$242.49
/
KT
Quantity:
Compare
$166.59
/
KT
Quantity:
