Compare
$68.00
/
EA
Tripp Lite Safety Power Strip
This Tripp Lite power strip is designed to safely distribute power to connected equipment in harsh environments. It provides a convenient source for multiple outlets wherever they are needed. 6 outlets distribute AC power to a wide range of power tools, drill presses, air compressors, power sanders and more. Convenient transformer outlets accommodate multiple transformers without blocking other outlets. A 9 ft. grounded cord with integrated cord clip reaches distant outlets. A GFCI plug protects users from electrical shock in wet or humid environments. A lighted on/off switch provides power control over connected equipment. 4 safety covers shield unused outlets from debris and accidental contact. A rugged metal case stands up to the harshest environments. Built-in cord wrap with hang holes provides convenient cord management. Integrated keyhole slots on bottom panel provide convenient wall/desk mounting. Lifetime limited warranty. Its bright yellow color alerts you and others that power cords and tools are in use. Helps save energy - designed to limit the energy used by other products, potentially helping you reduce your carbon footprint and save money.
Quantity:
Compare
$23.15
/
EA
Squids 3780 Power Tool Trap - 3. 3 in. Width x 9 in. Height x 4 in. Length - 1 Each - Black - Nylon, Cast Iron
The Power Tool Trap™ securely wraps around the battery portion of drills, impact drivers and other cordless power tools. D-Ring connection point attaches to a lanyard to prevent drops.
3780 Power Tool Trap
Squids 3780 Power Tool Trap - 3.3" Width x 9" Height x 4" Length - 1 Each - Black - Nylon, Cast Iron
Squids 3780 Power Tool Trap
3.3" Width x 9" Height x 4" Length - 1 Each - Black - Nylon, Cast Iron
Approved to the ANSI/ISEA 121-2018 standard
1000D nylon with water resistant backing
Two hook and loop straps secure battery boot to drill battery for safe and easy tethering
Nickel-plated cast iron D-Ring
3780S: Maximum safe working capacity: 6lbs // 2.7kg
Quantity:
Compare
$15.25
/
EA
Squids 3796 Power Tool Bracket - Drill & Impact Driver Tool Trap - 6 in. Width x 0. 8 in. Height x 3 in. Length - 1 Each - Stainless - Stainless Steel, Alloy Steel
The Squids® 3796 Power Tool Bracket for Drill & Impact Drivers creates a unique tool attachment point to tether cordless drills, impact drivers and other power tools with a tool lanyard. Connection points for tool lanyards are not always readily available on power tools, which can create hazardous environments while working at-heights. Tethering your tools should be a part of an overall fall protection plan to reduce the risk of dropped objects and increase workplace safety. The stainless-steel tool bracket comes complete with a set of six metric fasteners (M2. 5, M3, M4) to mount to a variety of power tools from brands including Bosch, Milwaukee, Makita, DeWalt and many others. STRAIGHTFORWARD INSTALLATION The one-time assembly creates a quick and easy one-step attachment to tether a lanyard to your power tools. Simply fasten the included tool bracket and labels onto screw ports intended for accessory belt hooks. Once the appropriate torque is applied to the anchor point, connect a tool lanyard to the bracket tether point to safely and securely tether tools. PERFECT FOR TOOLS WITH SCREW PORTS The Power Tool Bracket for Drills and Impact Drivers is the perfect solution for smaller 12v. cordless power tools that cannot be wrapped by Squids® 3180 Power Tool Wraps. The patent-pending design will retrofit tools up to 3lbs. (1. 36kg. ) depending the fastener size used. Though intended for cordless drills and cordless impact drivers, these brackets can also fasten to cameras, laser alignment tools and other tools and devices that have screw ports to fit M2. 5, M3 and M4 fasteners.
3796 Stainless Drill and Impact Driver Tool Trap
Squids 3796 Power Tool Bracket - Drill & Impact Driver Tool Trap - 6" Width x 0.8" Height x 3" Length - 1 Each - Stainless - Stainless Steel, Alloy Steel
Squids 3796 Power Tool Bracket - Drill & Impact Driver Tool Trap
6" Width x 0.8" Height x 3" Length - 1 Each - Stainless - Stainless Steel, Alloy Steel
Approved to the ANSI/ISEA 121-2018 standard
Stainless-steel bracket with built-in connection point for tool tethering is corrosion-resistant to withstand weathering
Patent-pending tool bracket design discretely fastens to open screw port on cordless drills/drivers so you barely notice it's there
Set includes 1 bracket connection point, 6 fasteners with locking washers and 2 product labels
Perfect for smaller, cylindrical 12v. drills and impact drivers or other power tools where traditional retrofit attachments are not compatible
Quantity:
Compare
$20.35
/
EA
Squids 3780 Power Tool Trap - 2. 5 in. Width x 8. 8 in. Height x 3. 3 in. Length - 1 Each - Black - Nylon, Cast Iron
The Power Tool Trap™ securely wraps around the battery portion of drills, impact drivers and other cordless power tools. D-Ring connection point attaches to a lanyard to prevent drops.
3780 Power Tool Trap
Squids 3780 Power Tool Trap - 2.5" Width x 8.8" Height x 3.3" Length - 1 Each - Black - Nylon, Cast Iron
Squids 3780 Power Tool Trap
2.5" Width x 8.8" Height x 3.3" Length - 1 Each - Black - Nylon, Cast Iron
Approved to the ANSI/ISEA 121-2018 standard
1000D nylon with water resistant backing
Two hook and loop straps secure battery boot to drill battery for safe and easy tethering
Nickel-plated cast iron D-Ring
3780S: Maximum safe working capacity: 6lbs // 2.7kg
Quantity:
Compare
$33.99
/
EA
Tripp Lite Mounting Clamps for PS- and SS-Series Bench-Mount Power Strips Pack of 2 - Steel - Black
Clamps have built-in clips to securely mount Tripp Lite PS- and SS-series bench-mount power strips without the need for drilling holes. C-Clamps Securely Mount Power Strips without Drilling Now its possible to mount Tripp Lite PS- and SS-series bench-mount power strips without drilling into walls or workbenches. Sold in a pack of two, the PSSS2C C-clamps attach to the edge of a desk, table, workbench or other solid, flat surface up to 2. 25 inches thick. Slide the clamps onto the edge of your surface, hand tighten the adjustment knobs to secure and then snap your power strip into the built-in mounting clips. For optimal support, use at least two clamps for power strips 36 inches and shorter. For power strips longer than 36 inches, use an additional clamp every 12 to 18 inches. Add Flexibility to Power Strip Installations The PSSS2C clamps are perfect for installations where drilling mounting holes is not possible or desirable. There are no mounting fasteners, so you can reposition the power strip installation quickly. The built-in mounting clips allow you to replace a power strip without removing the clamps from the mounting surface. Made of heavy-duty steel, the clamps withstand the rigors of daily use. Retrofit Existing Installations to Improve Access to Outlets You can change the mounting of a Tripp Lite power strip you already own to improve access to the outlets or to avoid drilling new holes when relocating the strip. The built-in mounting clips are designed for use with Tripp Lite PS- and SS-series bench-mount power strips. (Compatibility with other power strips depends on the striPs dimensions; the mounting clips are not adjustable. ) Support for horizontal mounting; no drilling required Clamps add flexibility and portability to new installations and retrofits C-clamps fit edges up to 2. 25 inches thick on desks, tables and workbenches Built-in mounting clips accommodate Tripp Lite PS- and SS-series power strips Heavy-duty steel constru
Quantity:
Compare
$28.99
/
EA
Ergodyne Arsenal 5563 Power Tool Holster, 12inH x 2-1/2inW x 6inD, Gray
Keep your power drill or impact driver within reach in the Ergodyne Arsenal 5563 Holster. This power tool holder is made of ballistic polyester and features 2 D-rings for lanyard attachment. Designed to house a power drill or impact driver on an articulating iron hook. Made of 1680-denier ballistic polyester to resist abrasions. Hook lays flat for low-profile use. 2 exterior D-rings make tool attachment easy. Reflective strip for visibility. Modular buckle connection system on the back allows simple attachment and removal. 5-lb maximum safe working capacity.
Quantity:
Compare
$393.49
/
EA
Squids 3170 Tower Climber Tool Tethering Kit - Elastic - Orange - 1 Each
The Squids® 3170 Tower Climber Tool Tethering Kit contains tool attachment and tool lanyard solutions specific for tools commonly used by tower climbers in the telecom industry, as well as linemen and antenna workers. RECOMMENDED TOOLS The kit contains product solutions for tethering cordless power drills, impact drivers, angle drivers, heat guns, levels, tape lines, adjustable spud wrenches, combination wrenches, torque wrenches, ratcheting wrenches, hex keys, tape measures, flush cut pliers, cable cutters, screwdrivers, nut drivers, utility knives and pry bars. WHATS INCLUDED The tool attachment solutions in this kit include three power tool traps, various sized hand tool traps, tape measure trap, tool shackle D-rings and a variety of Tool Tail™ attachments (elastic, webbing and wire). The kit also includes a roll of self-adhering tape that requires no heat source for securing tool tails onto tools. These solutions create quick and easy attachment points for tool lanyards. The kit also includes several tool lanyard styles (coil, retractable, shock-absorbing, with locking single and dual carabiners) with various weight ratings ranging up to 15lbs / 6. 8kg to accommodate different tools and attachment/anchor points. STRAIGHTFORWARD INSTALLATION Connection points for tool lanyards are not always readily available on tools, which can create a hazardous environment while working at heights. Learn how to tether your tools using the products included in the kit here. Safety lanyards are a part of an overall fall-protection plan to reduce the risk of falling objects and increase workplace safety. When working at heights its essential to tether tools, and this tethering kit makes it easy to do by trade. Its all the tool tethering solutions you need for the job, all in one convenient carrying case.
3170 Kit Tower Climber Tool Tethering Kit
Squids 3170 Tower Climber Tool Tethering Kit - Elastic - Orange - 1 Each
Squids 3170 Tower Climber Tool Tethering Kit
Elastic - Orange - 1 Each
TESTED & APPROVED: All products meet ANSI/ISEA 121-2018
Kit includes (click on each to learn more):
Quantity Description:
Three - 3780L Power Tool Trap
One - 3705 Wire Screwgate Tool Tail (6-Pack)
Quantity:
Compare
$435.95
/
EA
CARL Extra Heavy-duty 3-hole Power Punch - 3 Punch Head(s) - 300 Sheet of 20lb Paper - 9/32 in. Punch Size - Steel - Platinum
Sturdy, metal punch easily drills the standard, 9/32 in. three-hole punch, pattern through 300 sheets of 20 lb. bond paper. Hollow punch heads make punching easier. Punch is preset for standard three-ring binders. Design features adjustable margin depth selector and centering guides. Large-capacity waste tray is easy to empty. Three-hole punch is made of heavy-gauge steel construction.
Heavy-Duty 3-Hole Punch, 9/32" , 300-Sht Cap., Platinum
CARL Extra Heavy-duty 3-hole Power Punch - 3 Punch Head(s) - 300 Sheet of 20lb Paper - 9/32" Punch Size - Steel - Platinum
CARL Extra Heavy-duty 3-hole Power Punch
3 Punch Head(s) - 300 Sheet of 20lb Paper - 9/32" Punch Size - Steel - Platinum
Punches up to 300 sheets of 20 lb. paper at a time; 9/32" holes
Hollow punch heads make punching easier
Preset for standard 3-ring binders
Adjustable, margin depth selector and centering guides; large-capacity waste tray
Heavy-gauge steel
Quantity:
Compare
$393.45
/
EA
Ergodyne Squids 3170 Tower Climber Tool Tethering Kit, Orange
Use this Ergodyne Squids 3170 Tower Climber Tool Tethering Kit to secure specific tools while you are on the job. The kit includes tool traps, lanyards, tails and other items to help you maintain safety while climbing towers and working at heights. Ideal for tower climbers in the telecom industry, as well as linemen and antenna workers. Designed to tether cordless power drills, impact drivers, angle drivers, heat guns, levels, tape lines, combination wrenches, torque wrenches, tape measures and more. Meets ANSI/ISEA 121-2018 standards. Kit includes three 3780L Power Tool Traps, 3705 Wire Screwgate Tool Tail 6-pack, medium 3700 Web Tool Tail 6-pack, small 3740S Hand Tool Trap 4-pack, medium 3740M Hand Tool Trap 4-pack, large 3740L Hand Tool Trap 4-pack and XL 3740XL Hand Tool Trap 4-pack. Kit also includes small 3790 Shackle Trap 2-pack, 2 medium 3790 Shackle Trap 2-packs, 2 large 3790 Shackle Trap 2-packs, 3713 Elastic Loop Tool Tails Swivel 3-pack, 3118F(x) Tool Lanyard, 3108F(x) Tool Lanyard, 3166 Coil Tool Lanyard and 3011 Retractable Tool Lanyard.
Quantity:
Compare
$14.85
/
EA
Ergodyne Squids 3796 Drill & Impact Driver Tool Trap, Stainless
Use this bracket to keep drill and impact drivers securely attached while on the job. The stainless-steel bracket offers a built-in connection point and is designed to resist corrosion, making it great for tough environments. Designed for small power tools, including 12V drills and impact drivers. Stainless-steel bracket helps fight corrosion and features a built-in connection point. Ambidextrous design can be flipped to either side. Meets ANSI/ISEA 121-2018 standards. Comes with 6 fasteners, including an M2. 5 socket cap head, 2 M3 Philips pan heads, 3 M4 Philips pan heads, locking washers and 2 product labels.
Quantity:
